User Tools

Site Tools


Sidebar


integrated_drive_motors:overview

Overview

The miniature linear motors with integrated drive have the same outside dimensions of the standard series.
The NLi series includes a low voltage servo-drive with a power-supply of 24/48 VDC and is programmable using a serial connection and a Modbus RTU protocol.
The little PLC inside of the NLi motors is able to control the linear motion, using digital in- and outputs. The PLC uses a table of 10 programmable positions where the following motion parameters are specified: the motion profile type (trapezoidal, triangular, polynomial, sinusoidal), the motion time, the waiting time and the input type used as a trigger. All these parameters are programmable using the PC software NiLAB Starter.

The NLi linear motors are particularly indicated for the replacement of pneumatic actuators, using the same control of the electrovalve.

en.nilab.at_wp-content_uploads_nli120q-m12_nli080q-hr.71-1024x603.jpg

It is possible to request a version with double connectors (in and out) for daisy chain installation.

integrated_drive_motors/overview.txt · Last modified: 2022/06/12 06:47 by mgavesi