User Tools

Site Tools


Sidebar


nilab_starter:how_to_program

How to connect and program the motor using PC

programming_cable.jpg

In order to program the intergrated linear motor using NiLAB Starter sofwtare you need the programming cable DA012060. This cable convert the USB to RS232/RS485. The programming cable is provided with a connector box copatible with connectors used with NLI080Q/X and NLi120QX.

First step is plug the USB cable into the PC and see what is the related COM port using the Windows Device Manager. For example here COM7 correspond to USB to RS232/RS485 programming cable.

nilab_starter_com_selection.jpg


Then, you have to select the right one on the combobox list in the NiLAB Starter Software and then press the button “Connect to Motor”.

nilab_starter/how_to_program.txt · Last modified: 2022/06/18 12:29 by mgavesi